Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Quick Links
2023-09-22
Manufacturing process of FPC Membrane Switch
FPC membrane switches are manufactured using a specialized process that involves printing conductive traces and components on a thin film material. This detailed article will provide a closer look at the manufacturing process involved in creating FPC membrane switches.
2023-06-07
Common factors and precautions of fluoride release membranes
1. The cleanliness of release membranes is currently an important factor that restricts the widespread use of high-quality fluorine release membranes in HDI production; Therefore, manufacturers or suppliers of durable fluorine release films must work in clean rooms when coating, winding, and cutting release films. The clean room must reach a level of 10000 to ensure the surface cleanliness of the release film, thereby ensuring the quality of the RCC pressed board.
2023-06-07
Several common problems and solutions of PET release film
PET release film is the most basic auxiliary material commonly used in the production process of die cutting factories. Therefore, the release film manufacturer has summarized several common problems and solutions in the application of PET release film in the die cutting process. During the die-cutting process, the release film usually encounters the following problems: 1. After the Double-sided tape is bonded with the PET release film, some double-sided tapes will peel back and make abnormal sound when peeling. 2. Anti stripping refers to the material that has not been stripped. 3. After punching and placing for a period of time, the tape and release film cannot be peeled off. 4. The release force of the release membrane is very low, and it feels like the release layer is easily detached. 5. The release film will generate static electricity and adsorb dust during the winding process
2023-06-07
What are the problems encountered in the release film during the die-cutting process
1. After the double-sided adhesive tape is bonded with the PET release film, some double-sided adhesive tape will reverse peel and make abnormal sound when peeling. 2. Anti stripping refers to the material that has not been stripped. 3. After punching and placing for a period of time, the tape and release film cannot be peeled off. 4. The release force of the release membrane is very low, and it feels like the release layer is easily detached. 5. During the winding process, the release film will generate static electricity and adsorb dust. For the above issues, there are usually the following solutions:
2023-06-06
Analysis of Pressure Sensor Manufacturers' Faults in Pressure Sensors
Analysis of Pressure Sensor Manufacturers' Faults in Pressure Sensors There are various types of pressure sensor faults, but pressure sensors are widely used, and many environments require the use of pressure sensors. In order to reduce the error of pressure sensors in different environments, it is necessary to reduce application errors and improve work efficiency. 1、 The pressure will increase, but the transmitter output will not increase
2023-06-06
Application Fields of Pressure Sensors
Pressure sensors are mainly used in fields such as turbocharger cylinders, turbochargers, gas-liquid turbochargers, gas-liquid turbochargers, presses, compressors, air conditioning and refrigeration equipment. 1. Suitable for hydraulic systems. Pressure sensors are mainly used in hydraulic systems to achieve closed-loop control of force. In typical mobile machinery and industrial hydraulic systems, if such extreme conditions are not taken into account, any pressure sensor will be quickly destroyed. An impact resistant pressure sensor is required. There are two main methods to achieve voltage resistance. One is a Strain gauge chip, and the other is an external coil.
Shenzhen Xin Jie Jia Electronic Membrane Switch co.,ltd
Tel：0086-0755-27884065
Mobile phone：86-13509657170
E-mail：jyj.2008vip@163.com
Add：5/F, 23rd Third Industrial Zone Fenghuang Xingwei Baoan Shenzhen China 518103
