Productive Process
Productive Process
Productive Process

Quick Links

Structural diagram

Technical Parameter

Electrical performance
1. Working voltage: ≤ 50VDC
2. Working current: ≤ 100mA
3. Contact resistance: 0.5~10 Ω
4. Insulation resistance: ≥ 100M Ω (100VDC)
5. Base material withstand voltage: 2kDVC
6. Rebound time: ≤ 6ms
7. Circuit resistance: 50 Ω, 150 Ω, 350 Ω in three levels, or determined according to user needs
8. Insulation ink withstand voltage: 100VDC

Mechanical properties

　1. Reliability service life:>1 million times
2. Closing displacement: 0.1~0.4mm (non tactile type)
0.4-1.0mm
3. Standard working force: 15~750g force
4. Silver slurry migration: At 55 ℃, at a temperature of 90%, after 56 hours, the voltage between the two wires is 10M Ω/50VDC
5. No oxidation and impurities on the silver slurry line
6. Silver slurry line width ≥ 0.3mm, minimum spacing 0.3mm, line burrs<1/3, line gap<1/4 line width
7. Pin spacing standard 2.54 2.50 1.27 1.25mm
8. The bending resistance of the outgoing line should be continuously rolled 80 times with a d=10mm steel rod.

ENVIRONMENTAL

1. Working temperature: -20 ℃~+70 ℃
2. Storage temperature: -40 ℃~+85 ℃ Temperature 95% ± 5%
3. Atmospheric pressure: 86-106KPa

Hazardous waste recycling

危废回收